Axelplastics Stripper Cleaning Sealer and Mold Release agent 
 Nidaplast Plastic PP Honeycomb     
 Nord Composites  Tooling gelcoat and resin        
 Diab Group PVC Foam, PET Foam, Balsa Core  
 Lantor NV  Non Woven Polyester Soric Coremat   
Others Materials wax, mono, acetone, MEKP, cobolt etc

Resin standard grade for general purpose with handlay up process, have pre-accelerator and non- accelerator
type with high strength and Lloyd's certificate make from many resin manufacture in Thailand.

Code	Manufacture	Packing	Download specification
7932 PT	Major resin	230 kg
955 P	Major resin	230 kg
922 LTN	Singapore	225 kg
774 NP	TOA	225 kg
2117	Eternal	230 kg
7213 RN	Siam Chemical	220 kg
235TPN	Mitsui	220 kg

Resin unsat polyester low shrinkage with high solid contant for mould application or large part with high strength,
suitable for hand lay up process and infusuion or RTM, have with pre-accelerator and non-accelerator of Llody's certificate

7215 Major resin packing 230 kg/drum download spec
355E Veanova packing 230 kg/drum download spec
9043 Veanova packing 230 kg/drum
PC 212 Siam Chemical packing 220 kg/drum For RTM and vacuum infusion process * NEW* ´download spec

Resin Iso-phathalic for high quality products with hiher strength and high temperature resistance and some chemical resistance such as Kayak bus bahttab boat moulding

815 Major resin packing 230 kg/drum download spec chemical resistance
289 Mitsui packing 220 kg/drum
2625 Cray vally packing 210 kg/drum download spec

Gel coat for bruch and spray use for protection surface of finish part with grossy appearance, high resistance
of weather, chemical
resistance and water resistance. Normallt we will put coilor pigment in gel caot for good appearance.
91 Major resin packing 25 kg/drum Download spec
9091 Veanova packing 50 kg/drum Download soec
8003 San&soil packing 50 kg/drum
920 Veanova packing 50 kg/drum Download spec

gel coat polyester for spray and bursh with color mixed promt to use for make grossy surface. make
to order of color request.

Packing 25-100 kg/drum

The Bisphenol A type epoxy vinyl ester resin. It provides excellent corrosion resistance to a borad
range of organic and inorganic acids, alkaliis , oxidizing chemical and salt solutions etc.
IT also provides very good mechanical strength such as tensile and flexural while incorporated with
reinforcement such glass fiber, carbon fiber or kevlar fiber etc.

Application: Chemical storage tanks, pipes, ducts. flooring etc

KRF 1001 MV Cray velley 180 kg/drum download specification Llody's certificate
Chemical resistance tables
910 Swancor packing 180 kg/drum download specification
802 Showa packing 180 kg/drum

Epoxy resin for laminating system which consist one resin and choice of many handeners
Application Wind energy, ships and boats, gliders, motor gliders, sporting goods, moulds and tools,
automotive, electrical, and other industrial.

download specification

RM 2000/50 is an unsaturated polyester resin, especially formulated for mould making filled and
pre-accelerated, it is a ready to use product. Obtaining moulds with superior surface profile.

• RM2000/50 have been desinged to polymerise at room temperature flollowing addition of MEKP
• Rapid cure and rapid manufacture of the mould (in one day).
• A easy to use product, pre-filled and pre-accelerated, with no future mixer required.
• Filler : reduce the cost and improve rigidity of the mould

RM 2000/50 use resin and glass fiber ratio 4:1 with 1-1.5% catalyst MEKP   download spec
RM 2550 use resin and glass fiber ratio 2.6 :1 with 1 -1.5% catayst MEKP download spec

• Good handle ability.
• High quality with very good mechanical properties.
• High brightness

High temperature and high chemical resistances make GC 207 very good for mould macking, especially for RTM moulds.

• Mix the peroxide well, never put under 2% or over 3%
• Put 0.4 to 0.5 mm thickness of gel coat (about 500 g/m2). Avoid axcess thickness especially in angles. We recommend the application of several thin layers rather than a thick one.

• GL 195 WHITE is thixotropic and pre-acceleratoed. Formulated for airless application.
• Good handleability and coverage.
• Freedom from drainge on inclined surfaces
• High quality, excellect water resistance (warm and cold) good chemical and temperature resistance.
  
  

• GC 195 9901 C is thixotropic and pre-acceleratoed. Formulated for airless application.
• Good handleability and coverage.
• Freedom from drainge on inclined surfaces
• High quality, excellect water resistance (warm and cold) good chemical and temperature resistance.
  
  

• Thixotropic, pre-accelerated gel coat.
• Gel coat curimg air dry by addition of the catalyst butanox M50
• Low density
• Spray application with gun or airless machine
  download spec
  

Vinylester Gelcoat
Packing 25 kg/drum

• Pre-accelerated bonding paste formulated to cure at room temperature with the addition of MEKP.
• Thixotropic product which enables a thickness of 45 to 10 mm vertical surface.
• Very low density : for the production of light sandwich structures.
• No shrinkage.
• Very low exotherm.
• NCL 804 can be machined
  download spec
  
  

NORD APPRET 230 is a sprayable primer for the surfaceing of plugs(models). These plugs can then be used to produce high quality mould. It has good adherence to plugs made from wood, sanded laminated polyester, and polyester plug surfacing putties such as Nord Core Light (NCL 804 PRBV Grey)

download spec

NORD LAQUE 210 A polyester lacquer designed with very high gloss to provide a surface finish for plugs and models. It is possible to obtain a brilliant surface finish due to a high surface hardness and excellent gloss.

download spec

• Norcal 304 TH LGT had been designed to polymerirse at room temperature following addition of MEKP.
• Low density to bond pieces like sandwiches, with balsa, PU..
• Good application with spatula.
• Colour change mechanism to indicate state of cure download spec