We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.
We have retails and whole sells of our products all in Thailand country.
We create products that enchance productivity.
Our mold releases and process aid additives do their job without getting in the way of yours. Our products are built to help you work quicker, cleaner and with less effort and expense.
We create coatings that are stronger and last longer and additives that work behind the scene. This makes your processing more effortless, and you, more productive.
Please contact us to discuss all the great features, and positive benefits, of our mold releases and process aid additives products.
AXEL manufactures a full range of proprietary mold releases and process aid additives. Founded in 1941, AXEL has developed a long standing relationship with manufacturers in many industries. XTEND®, MoldWiz®, PasteWiz®and CleanWiz®are some of the brand names you know us by.
Product demonstrations and how-to.
videos
Product demonstrations and how-to.
WCX Mold Stripper - Guide to Use
A video guide to use of WCX mold stripper. This easy, user friendly water-based stripper is highly effective in removing contamination and residue of silicone, semi-permanent mold release and many compounds and polishes.
CX-500 General Purpose Mold Cleaner - Guide to Use
CX-500 is a fast evaporating, general purpose mold cleaner. This video guide illustrates the correct way to use this cleaner.
Semi-Permanent Mold Sealer-Application of XTR
Start to finish demonstration of application of XTR semi-permanent mold sealer
XTEND 832 Semi-Permanent Release-Guide To Use
This video guide demonstrates and describes application of XTEND 832 semi-permanent mold release.
Semi-Permanent Mold Release - Application of XTEND 818
Start to finish application of 818, a high gloss semi-permanent mold release.
What is Semipermanents
Semi-permanent Releases
Conventional Mold Release
Waxes,Polymerices, PVA
Release film cross-links on exposure to atmosphere or temperature bonding to mold
Evaporation deposits a release film on the mold surface
Cross link and cures on the mold
Forms a chemical barrier
Thin, strong coatings
Release sits on the mold surface
Forms a physical barrier
Fills pores in the mold surface
Subject to transfer/buildup
All Release Preparation consists of 3 steps:
Mold preparation with Mold StripperCW-10NC / WCX
1Surface Contamination/many sources
Mold compound/polishes containing wax, animal fat or silicone
Various types of rags, including all in one box
Use of latex gloves
Gloves not disposed of between polishing, cleaning and release application
2 Mold Strippers
Separates and breaks down compound and waxes, when molds have been compounded/polished
CW-10/NC
WCX
Solvent based
Water based
Removes paste wax
Not suitable for removing build-up from wax/resin etc.
Moisture sensitive
Less durable
3Heavy Duty Stripper
Use To Convert From Paste Wax
Clean Build-up From Non-Skid
4 How to use
use neoprene or butyl gloves
use a “Charlie Brush”
soak if needed
follow with a warm water wash & CX-500
5 How clean is the mould?
Apply a piece of paper tape
Pull off at 45° angle. If the mold is clean, consistent resistance should be felt
6 REPEAT 2 times
Mold Cleanner CX500
Use two clean, white cotton cloths
Scrub the mold with one cloth soaked with CX-500
Wipe off with second, dry, clean cotton cloth before it evaporate.
NOTE: Work in small areas so you can wipe on and wipe off before CX-500 dries
The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.
products
Composites / Cleaners and Strippers
Product Number
Application Technique/Temperature
Type of Mold
Features
CleanWiz
Solvent-based
CW-10NC
Scrub over mold surface;
Wait (in hot conditions, cover mold to slow evaporation); Water wash.
FRP, Epoxy, Aluminum, steel etc.
Recommended for removing heavy buildup of paste waxes. Also good for removing styrene buildup on textured, or non-skid mold areas.
Cleaner
CX 500
General purpose cleaner. Best used at ambient temperature.
Wipe on liberally and wipe off before dry
FRP, Epoxy, Metal
Quick flashing solvent blend that is a good first step for preparing molds for application of release.
Water-based
Stripper
WCX
SHAKE WELL
Scrub/rub liberally over mold surface;
Wait 15 minutes; Wipe off excess; Liberally water wash.
FRP, Epoxy, Metal
(except plated)
100% water-based stripper that will remove semi-permanent mold release and styrene hazing. Also recommended for removing silicone contamination from polishes, releases and other compounds.
Download a printer-friendly PDF:
Solutions for Composites : External Mold Release
This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.
Solvent-based
Wipe-On / Wipe-Off Easier to Polish
greater polishing time window
no streaking problems
Protects Molds
Increases Release Longevity
Maintains Surface Gloss
Reduces Hazing & Build-up
A sealer protects the mould from being damaged
No sealer used
Application Technique
Industrial paper towels work best for solvent based semi-permanents
100% cotton is better for water-based productsDO NOT OVERAPPLY
multiple thin coats are betterUse a controlled linear application with slight overlap
Allow time for proper cure on semi-permanents
This will vary depending on temperature and humidity
The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.
products
Composites / Mold Sealer
Product Number
Application Technique/Temperature
Type of Mold
Features
Yield
Semi-permanent
Xtend
Solvent-based
XTR
Wipe on/Wipe off,
Apply at ambient or up to 150F/66C
Mold up to 450F/232C
FRP, Epoxy, Aluminum etc.
Recommended for all new FRP molds and as an initial preparation when molds have been completely cleaned or repaired.
High gloss
Class “A”
PR-20
Primer
Wipe or spray on at ambient temperature.
Post cure if desired.
Mold up to 450F/232C
FRP, Epoxy, Porous molding surfaces
Restores gloss on worn FRP tooling, seals porosity in epoxy tools.
Can be used to seal many types of plugs and patterns.
HAS NO RELEASE PROPERTIES.
Restored gloss
Water-based
WS-50
Molf sealer
Wipe on and let dry. For best results bake at process temperature after final coat
Mold up to 450F/232C
FRP, Epoxy
100% water-based. Especially recommended for epoxy molds used in windblade production in conjunction with W-7838D release.
Non-cosmetic
MoldWiz Polymeric Release
Solvent-based
Melax Mold Conditioner 3F/NC
Apply at ambient.
Wipe on/W
et polish
FRP
Fills micro-porosity in FRP molds.
Can be used prior to applying MoldWiz polymer releases like F-57
High gloss when wet polished
XTR Sealer application
Work in small areas (1.5 – 3 m2)
Wipe-on a light coat with a paper towel
Wait approximately 30 -60 seconds (until it begins to evaporate)
Wipe over with dry paper towel to even out film of sealer (you are not wiping dry)
Wait an additional 2-3 minutesPolish with a cotton cloth
NOTE: If polishing is difficult of causes streaks or clouds,
STOP – you are polishing to soon.
Wait a bit longer and polish again. This time it should be very easy
Download a printer-friendly PDF:
Solutions for Composites : External Mold Release
This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.
The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.
products
Composites / External Mold Releases / Open Molding/Bag Molding
Product Number
Application Technique/Temperature
Type of Mold
Features
Yield
Semi-permanent
Xtend
MoldWiz Polymeric Release
Solvent-based
818
Wipe on. NO Wipe off
Apply at ambient
Mold up to 450F/232C
All
Non-porous
Quickest application.
For polyester or vinyl ester
Good gloss and no pre-release
Class “A”
832
Wipe on/Wipe off for Very high gloss
Wipe on/Let dry for Good gloss
Apply at ambient or up to 150F/66C
Mold up to 450F/232C
All
Non-porous
Good release for epoxy.
Easy application. Self-cleaning.
Good slip. Good in hot climates or on warm molds
Class “A”
858
Spray on at ambient or up to 150F/66C
Can also be wiped on
Mold up to 450F/232C
All
Non-porous
High gloss spray
Class “A”
1050
Wipe on. NO Wipe off
Apply at ambient
Use XTR sealer before application
Mold up to 450F/232C
All
Non-porous
Excellent gloss. Easy streak free application. Resists hazing in production.
Class “A”
1080
Wipe on. NO Wipe off
Apply at ambient
Mold up to 450F/232C
All
Non-porous
Quickest application.
For polyester or vinyl ester
Good gloss and no pre-release
Class “A”
1110
Wipe on/Wipe off for Very high gloss
Wipe on/Let dry for Good gloss
Apply at ambient or up to 150F/66C
Mold up to 450F/232C
All
Non-porous
Good release for epoxy.
Easy application. Self-cleaning.
Good slip. Good in hot climates or on warm molds
Class “A”
19ZAM
Wipe or spray on at ambient
Mold up to 450F/232C
All.
Especially epoxy or aluminum
Can be used on vacuum bags
Long lasting durable release with medium cosmetics.
Especially for non-gel-coated or primer gel-coated parts
Extends life of silicone bags
Medium cosmetics
19RSS
Wipe or spray on warm molds
Apply at 100F/38C or up to 150F/66C
Mold up to 450F/232C
All.
Especially epoxy or aluminum
Can be used on vacuum bags
Long lasting durable release with medium cosmetics.
Especially for non-gel-coated or primer gel-coated parts
Extends life of silicone bags
Medium cosmetics
Water-based
W-102
Wipe on and polish off at ambient temperature.
Mold up to 450F/232C
All
100% water-based
High gloss
When applied on XTR sealer
MoldWiz Polymeric Release
Solvent-based
F-23A/NC
F-23A/NA
Wipe at ambient
Wipe on/wet polish for high gloss. Can also be sprayed.
“L” formulation has increased luster
All
Contains fluropolymer.
Available in aerosol or bulk liquid.
High gloss if polished
Sacrificial release, apply before each part, preferably by spray.
FRP
Creates temporary matte surface on molds. Imparts permanent matte finish on parts.
Matte
Water-based
WB2700
Wipe or spray at ambient or higher
Mold up to 450F/232C
High slip release
Good for epoxy and difficult release
Not cosmetic
Download a printer-friendly PDF:
Solutions for Composites : External Mold Release
This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.
We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.
We have retails and whole sells of our products all in Thailand country.
JB
Martin Cabon Fiber Carbon fiber, Aramid fiber 
NJ
Robinson Spray resin and gel coat
machine 
Fiber Glass Chopped strand mat,
Roving, Woven roving etc
Resin & Gelcoat
Polyester, Vinylester, Epoxy resin 
Vacuum Bagging Bagging
film, Peel ply, sealant tape etc 
Magnum
Venus Plastech LRTM machine
No sealer used
