We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.
We have retails and whole sells of our products all in Thailand country.
Fiber Glass
Chopped Strand Mat
E glass
C glass
is a kind of reinforacing products that made from continuous fiberglass strand, which is chopped into a certain length, distributed in a random and non-directional position and bonded with binders. It is suitable for hand lay-up, mold press,filament winding and machnaical froming etc., such GRP processes. The main products include kinds of panels, boats, bath, equipments, automobile parts and cooling towers etc.
UP = Unsaturated Polyester resin, VE = Vinyl Ester Resin, EP = Epoxy Resin
Woven Roving
E glass
C glass
is weaved with E glass direct roving or Dornier looms, used hand lay-up, mold press etc., GRP forming processes, main products include boats, panels, automobile parts, storage tanks, large plates, etc.
UP = Unsaturated Polyester resin, VE = Vinyl Ester Resin, EP = Epoxy Resin
ComboMat Fabrics
E glass
inclule multi-axial warp knitting and combo stich mat. The multiaxial product is made with E glass direct roving parallel aligned 0, 90,+45 and -45 directions ( also could be in any one or several of these directions, one direction one layer), then stitch together with or without a layer of evenly distributed, then stiched with or without woven roving products
Packaging : 50 kgs/roll
The both products are extensively used in GRP pultrusion process, hand lay-up process and RTM process etc., main products include GRP boats, automobile parts, wind energy blades, etc.
Product No
Overall Density (g/m2)
Woven Roving Density (g/m2)
Chop Density (g/m2)
Polyester Tarn Density (g/m2)
ESM 1808
896.14
612
274.64
9.5
ESM 1810
926.65
612
305.15
9.5
ESM1815
1080.44
612
457.73
10.71
ESM2408
1132.35
847
274.64
10.71
ESM2410
1162.86
847
305.15
10.71
ESM2415
1315.44
847
457.73
10.71
High Tenperture Protection Fabrics.
It is woven by Texturized fiberglass yard or High Silica fiberglass yarn. It is lightweight, flexibile, Chemical resistance, without any of the health hazards and withstandard continuous heat to 10000&3000 F
Typical Style Texturized Fabrics
Packaging
: 200 meters/Roll
Style
Weight (g/m2)
Thickness
(mm)
Yard (Tex)
Count (end/in)
Woven
Withstand Temperature
(F)
Warp
Fill
Warp x Fill
84215
288
0.3
ECG200
ECG200
17.8 x 14
Plain
1000
2050
580
0.8
ECG430
ECG430
20.3 x 14.5
Plain
1000
M22
750
1.0
ECG430
ECG430
25 x 20
Plain
1000
M33
815
1.2
ECG860
ECG1720
12.7 x 6.5
Plain
1000
Surfacing Mat Glass Fiber, Tissue Mat
We supply a wide variety of Surface Tissue. The producst are made from randomly dispered glass fiber or carbon fiber, wet laid and bonded into a shin sheet.
It mainly used in the surface layers of reinforced plastic components, improving surface appearance and enchancing the corrosion protection of chemical yanks, pipes and equipment.
Packaging : 250 meters/Roll
Type
Weight (g/m2)
Materials
Standard Packing
Remarks
PT C 300
30
C glass fiber
width 1 m x length 250 meter
for hand lay-up
PT E 300
30
E glass fiber
width1 m x length 250 meter
for hand lay-up
FW C 300
30
E glass fiber
width1 m x length 250 meter
for filament winding
CBG-20
20
50%carbon&50% C glass fiber
width1 m x length 200 meter
for corrosion protection
CBG-30
20
100%carbon fiber
width1 m x length 100 meter
for corrosion protection and antistatic
Direct Roving Fiber Glass
E glass Direct roving is compatible with polyester, vinyl ester, epoxy resin and phenolic resin etc., this products isextensively used in filament winding, pultrusion processes, also used in weaving farics and woven roving
Packaging : 17 kgs/Roll
- Direct Roving for Spray up (Spray Up Roving) TEX 2400
- Direct Roving for Filament Winding (Filament Roving) TEX 1200, TEX 2400, TEX 4800
- Direct Roving for Pultrusion (Pultrution Roving)
- Direct Roving for Weaving (Weaving Roving)
Unidirectional Mat Fiber Glass
Unidirectional mats include 0 and 90 degree. the density of 0 degree od unidirectional is 300 g/m2 to 900 g/m2 and density of 90 degree unidirectional mat is 150 g/m2 to1200 g/m2. This product is mainly used in making tubes and blades of wind power turbines.
Packaging :
50 kgs/Roll
Products code
0 degree
90
degree
stitch yarn
Mat
total weight
g/m2
T300
TM300/300
L400
L600
L800
-
-
413
606
799
300
300
54
54
54
10
10
12
12
12
-
300
50
50
50
310
610
529
722
915
Biaxial Fiber Glass
E-LT series mat: Two layers of roving (550/m2-1250g/m2) are aligned at 0/90 with or without a layers of chopped strands(0 g/m2-500 g/m2). The product has a maximum width of 110 inches. This product can be used for manufacturing boats, cases and shell of car.
Packaging : 50
kgs/Roll
Product No
0 ͧÈÒ
90 ͧÈÒ
stitch yarn
mat
total weight
g/m2
LT400
202.56
200.79
18.36
-
421.71
LT600
331
300
12
-
643
LTM6000/225
331
300
12
225
868
LTM600/450
331
300
12
450
1093
LT800
413
402
12
-
827
LT1000
606
402
12
-
1020
E-BX series mat (two stage): Two layers of roving (450 g/m2 - 850 g/m2) are aligned at +45/-45 with or without a layer of chopped strands ( 0 g/m2 - 5-- g/m2). The product has a maximum width of 100 inches. This products is uesed in boat manufacturing
Product No
+45 degree
-45 degree
stitch yarn
mat
total weight g/m2
BX 300
150.33
150.33
5.35
-
306.01
BX 400
225.49
225.49
5.35
-
456.33
BX 600
300.66
300.66
5.35
-
606.67
BXM 1208
211.78
211.78
12.24
274.64
710.43
Triaxial Fiber Glass
E-TTX (+45 / 90 /-45)and E-TLX series ( +45/ 0 / -45): Three layers of roving (550/m2-1250g/m2) are aligned at +45/-45/0/90 with or without a layers of chopped strands(0 g/m2-500 g/m2). The product has a maximum width of 110 inches. This product can be used for manufacturing boats, cases and shell of car.
Packaging :50 kgs/Roll
Product code
0 ͧÈÒ
90ͧÈÒ
+45 ͧÈÒ
-45 ͧÈÒ
stitch yaed
total weight g/m2
TLX600
3.6
-
300.65
300.65
10
614.9
TLX750
236.22
-
250.55
250.55
5.35
742.67
TLX900
425
-
234
234
14
907
TTX600
-
165
217
217
8
607
TTX900
-
307
301
301
8
916
TTX1200
-
390
401
401
8
1200
Quadraxial Fiber Glass
E-QX ( 0/+45/ 90/-45) Four layers of roving (550/m2-1250g/m2) are aligned at 0/+45/ 90/-45 with or without a layers of chopped strands(0 g/m2-500 g/m2). The product has a maximum width of 110 inches. This product can be used for manufacturing boats, cases and shell of car.
PackagingØ : 50 kgs/Roll
Product code
0 ͧÈÒ
90 ͧÈÒ
+45 ͧÈÒ
-45ͧÈÒ
stitch yarn
mat
total weight g/m2
QX600
142
142
150
150
10
-
594
QX800
213
213
199
199
10
-
834
QX1000
284
284
214
214
10
-
1006
QX1200
284
284
301
301
10
-
1180
QXM1200/225
284
284
301
301
10
225
1405
QXM1350/225
284
284
401
401
10
225
1605
QXM1800/225
567
567
301
301
10
225
1971
3D Two Deck Layers Woven Fabrics (Sandwich Structure Fabrics)
3-D 2-decklayer woven fabrics are made of 100% E glass yarns as well as carbon fibers or hybridization of other high performance fibers. Two deck layers bonded together by vertical piles to the specified height of 2-20 mm. When the 3D two decklayer woven fabric is impregnated with a thermoset resin, composite materials rise to a preset vertical height. It is widely used for railway, automotive, ships, tanks construction and aerospace, etc.
Pakaging:50 meters /Roll
Specification
Density (ENDS/CM)
Tensile Strength (N/50mm)
Area Weight (g/m2)
Core Height(mm)
Warp
Weft
Warp
Weft
740
2
18
12
4500
7600
800
4
18
10
4800
8400
900
6
15
10
5500
9400
1050
8
15
8
6000
10000
1480
10
15
8
6800
12000
1550
12
15
7
7200
12000
1650
15
12
6
7200
13000
1800
18
12
5
7400
13000
2000
20
9
4
7800
14000
Specification
Machanical Properties ASTM)
Termal Properties (DIN)
Area
weight
(g/m2)
Core
height
(mm)
Horizontal pressure
(Mpa)
Tensite Strength (warp/weft) (Mpa)
Cutting Strength (warp/weft) (Mpa)
4-point Tensil Strength (warp/weft) (Mpa)
Thermal
Resistance
R m2k/w
740
2
11.2
230/286
0.6/1.4
41/118
0.035
800
4
6.4
232/292
0.6/1.0
48/124
0.06
900
6
3.7
237/305
0.4/0.8
56/128
0.08
1050
8
3.0
235/321
0.4/0.7
57/131
0.12
1480
10
1.8
228/330
0.3/0.5
54/129
0.12
1550
12
1.3
241/334
0.2/0.2
50/123
0.15
1650
15
1.2
237/343
0.2/0.2
43/117
0.17
1800
18
1.0
236/351
0.2/0.1
40/104
0.20
2000
20
0.8
230/357
0.1/0.1
38/39
0.24
LRTM, INJECTION :Sandwich Flow
It is made Synthetic mat or woven roving and Chopped strand mat bonded with stitching polyester. It is ideal for RTM and Light RTM process.
Packaging :70 kgs/Roll
Style
Layer 1 chopped fiber (g/m2)
Layer 2 Synthetic core (g/m2)
Layer3 chopped fiber (g/m2)
Sewing thread PES 75D (g/m2)
weight per unint area (g/m2)
Width
(cm)
Thickness
(mm)
P300C300
300
180
300
12
792
125
2.0 - 4.0
P450C450
450
180
450
13
1093
125
2.5 - 4.5
P600C600
600
180
600
14
1394
125
3.0 - 5.0
Stitch Chopped Strand Mats.
E Glass Stitched Mat (450g/m2-900g/m2) is made by chopping continuour strands into chopped strands and stitching them togrther. The product has a maximum width of 110 inches. This product can be used in boat manufacturing and tubes.
Packaging : 50 Kgs./Roll
Product No
Overall Density (g/m2)
Chop Density (g/m2)
Polyester Tarn Density (g/m2)
EMK 300
309.5
300
9.5
EMK380
399
380
19
EMK450
459.5
450
9.5
EMC0020
620.9
601.9
19
Continuous Strand Mats Fiber Glass
Continuous Strand Mat is made by random arranged continuous filament in multiple layers held together by a binder. It is mainly used for Pultrusion and RTM process.
Packaging :50 Kgs./Roll
Typical Type (Continus Filament Mat)
Type
Strandard Weight (g/m2)
Width (cm)
Binder
Application
PT
300,450
Max.200cm
Polyester powder low solubility in Styrene
Pultrusion
PT
300,450,600
Max.200cm
Polyester powder High solubility in Styrene
RTM
Wet Chopped Strand Fiber Glass
E-Glass chopped Strands are in line chopped, it id suitable for reinforcing thermoplastics, Typical products include automoblie fitting, electronic and electrical parts, mechanical products, etc.
PackagingØ :25 Kgs./Box
- J4010 Diameter 10-160um, chopped length 3, 4.5, 6, 12, 25 mm with UPR
- J4012 Diameter 10-160um, chopped length 3, 4.5, 6, 12, 25 mm with UPR and EPOXY
Milled Fibers,
Milled Fibers are reinforcements uesed in thermoplastic and thermoseting for excellent dimentional stability, shrinkage control, high modulus and chemical resistance.
Milled Fibers are milled to a specific density to meet customer processing needs.
Packaging : 15 Kgs./Box
Type
Filament
Dia.(micron)
Density (g/m2)
Mesh
Application
PTMF100
8-13
2.2 - 2.4
100
Thermoplastic/
Thermoset
compounds
PTMF200
8-13
2.2 - 2.4
200
PTMF300
8-13
2.2 - 2.4
300
Fiberglass Mesh, Net coated
It is made by fiberglass yarn and coated with chemical latax. It has good Alkali resistance property and good mechanical durability, it is uesed in exterior insulation finishing system (EIFS), Roofing system, Marble, etc...., The main technical datas of goods can meet request of EN13496
We are importer all materials for fiber glass industrial such as resin, gel coat, fiber glass, carbon fiber, aramid fiber, honeycomb, coremat, PVC foam, Balsa wood, tooling resin, tooling gelcoat, spray gel coat machine, vacuum materials.We have retails and whole sells of our products all in Thailand country.
, Ligth RTM 
Fiber Glass
